PIC18LF46K22-I/MV
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 40-UFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® XLP™ 18K |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES 1.8 V MINIMUM SUPPLY AT 20 MHZ |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF46K22 |
| Pin Count | 40 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 3.8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 12mA |
| Bit Size | 8 |
| Data Converter | A/D 30x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 7 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Number of Programmable I/O | 36 |
| Height Seated (Max) | 0.55mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF46K22-I/MV Overview
For space savings, it is available in the 40-UFQFN Exposed Pad package. A Surface Mount mounting method is used. A package of Tube contains it. PIC core processor is present on the device. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. 35 I/Os are present on the device. Based on its base part number of PIC18LF46K22, other similarly-sized components can be found. QUAD is the position of its terminals on the board. 40 terminationals are present. An electrical component such as this is included in the series PIC? XLP? 18K. Because the supply voltage is 3V, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 40 pins are required to construct this device. It is equipped with 40 pins in total. The component is included in Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 64kB. The maximum supply current is set at 12mA. A 2/3.3V source of power is being used to run it. Working at a frequency of 64MHz results in excellent efficiency. A total of 7 timers/counters are present. This part is an integral part of the PIC CPU family. A chip with 36 programmable inputs/outputs is available. Moreover, it possesses the property of ALSO OPERATES 1.8 V MINIMUM SUPPLY AT 20 MHZ. Using a Internal oscillator type, it works well.
PIC18LF46K22-I/MV Features
40-UFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF46K22-I/MV Applications
There are a lot of Microchip Technology PIC18LF46K22-I/MV Microcontroller applications.
- Nintendo
- Oil and gas
- Smart instruments
- Calculators
- Binding machines
- Industrial instrumentation devices
- Smart highways (navigation, traffic control, information monitoring and car service)
- Smoke alarms
- Electromechanical control
- Entertainment products
