PIC24EP128GP202-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® 24EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Base Part Number | PIC24EP128GP202 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 8K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 43690 |
| On Chip Program ROM Width | 24 |
| CPU Family | PIC |
| Length | 34.671mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24EP128GP202-I/SP Overview
To save space, it is included in the 28-DIP (0.300, 7.62mm) package. Through Hole is the way to mount it. It is available in the Tube package. Device with PIC core processor issupported. When working, the temperature should be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. There are 21 I/Os on the board. In order to find similar components, it has a base part number of PIC24EP128GP202. The terminals are positioned at DUAL. A 28 termination is contained within it. An electrical component such as this is included in the series PIC? 24EP. Using the 3.3V supply voltage allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. A total of 28 pins are required to construct this device. It is equipped with 28 pins in total. It is one of the components included in Microcontrollers. In the device, there is a memory capacity of 128kB which may be used to store programs and data. At a frequency of 70MHz, it can achieve excellent efficiency. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. 5 counters/timers are currently active. As part of the PIC CPU family, this component is included. There is an oscillator type Internal used in this circuit.
PIC24EP128GP202-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC24EP128GP202-I/SP Applications
There are a lot of Microchip Technology PIC24EP128GP202-I/SP Microcontroller applications.
- Heater/Fan
- Binding machines
- Wastewater treatment
- Television
- Light sensing & controlling devices
- Oscilloscopes
- Nintendo
- Electromechanical control
- Removable disks
- Vacuum cleaners
