PIC24EP256GP202-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® 24EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24EP256GP202 |
| Pin Count | 28 |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 16K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 87381 |
| CPU Family | PIC |
| Number of ADC Channels | 6 |
| Number of I2C Channels | 2 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24EP256GP202-I/SO Overview
Due to the benefits of saving space, it is available in the 28-SOIC (0.295, 7.50mm Width) package. A Surface Mount mounting method is used. You can find it in the package of Tube. Devices with PIC core processors are available. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 21 I/Os on it. Based on its base part number of PIC24EP256GP202, other similarly-sized components can be found. DUAL is the location of its terminals. In this case, there are 28 terminationals. An electrical component such as this is included in the series PIC? 24EP. High efficiency is possible due to the 3.3V supply voltage. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. 28 pins are used to construct it. In total, it has 28 pins. Microcontrollers contains this component. Using the devices' 256kB memory size, you can store programs and data. Power is provided by a 3.3V source. Using a frequency of 70MHz, it is very efficient. A total of 5 timers/counters have been set up. The part is a part of the PIC CPU family. Normally, the supply voltage (Vsup) should remain above 3V. There is an oscillator type Internal used in this circuit.
PIC24EP256GP202-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24EP256GP202-I/SO Applications
There are a lot of Microchip Technology PIC24EP256GP202-I/SO Microcontroller applications.
- Automatic control
- Food and beverage
- Playstation
- Dishwashers
- Current meter
- Fire detection & safety devices
- Information appliances (networking of household appliances)
- Calculator
- Toasters
- Home appliances
