PIC24EP256GP202-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® 24EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Base Part Number | PIC24EP256GP202 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 16K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 87381 |
| On Chip Program ROM Width | 24 |
| CPU Family | PIC |
| Number of PWM Channels | 6 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24EP256GP202-I/SP Overview
Due to the benefits of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. Through Hole is the way to mount it. A package of Tube contains it. Device with PIC core processor issupported. It is important to keep the temperature at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. 21 I/Os can be found on it. A component with the same part number as PIC24EP256GP202 can be compared to other similar components. The terminals of this device are located at DUAL. As far as terminations are concerned, there are 28 terminations present. The electrical component is part of the series PIC? 24EP. Because the supply voltage is 3.3V, high efficiency can be achieved. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. 28 pins are used to construct it. A total of 28 pins are attached to it. In Microcontrollers, this component is included. Data and programs can be stored on the devices with a memory size of 256kB. This device achieves excellent efficiency at frequencies of 70MHz. While employing 3.3V, designers can maximize its supply voltage adaptability. 5 counters/timers are currently active. CPU family PIC comprises the part. Using an oscillator type of Internal, it works.
PIC24EP256GP202-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC24EP256GP202-I/SP Applications
There are a lot of Microchip Technology PIC24EP256GP202-I/SP Microcontroller applications.
- Smartphone
- Leakage current tester
- Hearing aids
- Measuring revolving objects
- Aerospace navigation systems
- Hand-held metering systems
- Keyboards
- DCS control intelligent sensor
- X-ray
- Set-top boxes
