PIC24EP256GU810-E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2010 |
| Series | Automotive, AEC-Q100, PIC® 24EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24EP256GU810 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 280kB |
| Oscillator Type | Internal |
| Number of I/O | 83 |
| RAM Size | 12K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART, USB OTG |
| Supply Current-Max | 120mA |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| Address Bus Width | 14 |
| ROM (words) | 87381 |
| On Chip Program ROM Width | 24 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24EP256GU810-E/PT Overview
Due to the benefits of saving space, it is available in the 100-TQFP package. Surface Mount is used for mounting. In the package Tray, it is included. There is a PIC as core processor in this device. When working, it is recommended that the temperature be kept at -40°C~125°C TA. FLASH is its program memory type. 83 I/Os can be found on it. It has a part number of PIC24EP256GU810 that can be used to locate similar components. At QUAD, its terminals are located. In this case, there are 100 terminationals. Automotive, AEC-Q100, PIC? 24EP is the series number of this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. There are 100 pins used in the construction of this device. Based on the Surface Mount method, it is mounted. This device has a total of 100 pins. It falls under the category of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 280kB. In this case, 120mA represents the maximum current supply. It is highly efficient when it works at a frequency of 60MHz. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. There are 9 timers/counters. The part is a part of the PIC CPU family. There is an oscillator type Internal used in this circuit.
PIC24EP256GU810-E/PT Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24EP256GU810-E/PT Applications
There are a lot of Microchip Technology PIC24EP256GU810-E/PT Microcontroller applications.
- Sonography (Ultrasound imaging)
- Digital TVs
- Equipment control
- Smart instruments
- Smartphone
- Calculators
- Home appliances
- Microwave ovens
- Binding machines
- Broadband technology, video and voice processing
