PIC24EP256GU810-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | PIC® 24EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24EP256GU810 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 280kB |
| Oscillator Type | Internal |
| Number of I/O | 83 |
| RAM Size | 12K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART, USB OTG |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| ROM (words) | 87381 |
| CPU Family | PIC |
| Number of A/D Converters | 2 |
| Number of ADC Channels | 32 |
| Number of PWM Channels | 28 |
| Number of SPI Channels | 4 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24EP256GU810-I/PT Overview
There is an option to purchase it in the 100-TQFP package, which saves space. In this case, it is mounted using the method of Surface Mount. It comes in the package?of a Tray. The device runs in PIC core processor. Work should be done at -40°C~85°C TA. FLASH is the type of program memory used by it. The device has 83 I/Os. To find comparable components, use the PIC24EP256GU810 base part number. The terminals of this device are located at QUAD. It has 100 terminationals. There are a number of electrical components in the PIC? 24EP series, including this one. As a result of the 3.3V supply voltage, high efficiency is possible. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. A number of 100 pins are used to construct it. Based on the Surface Mount method, it is mounted. It is equipped with 100 pins in total. The component is included in Microcontrollers. In the device, there is a memory capacity of 280kB which may be used to store programs and data. It performs extremely well at a frequency of 60MHz. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. The number of timers and counters is 9. As part of the PIC CPU family, this component is included. There is an oscillator type Internal used in this circuit.
PIC24EP256GU810-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24EP256GU810-I/PT Applications
There are a lot of Microchip Technology PIC24EP256GU810-I/PT Microcontroller applications.
- Coffee machines
- ECG machine
- Robots
- Pacemakers (used to control abnormal heart rhythm)
- Electrocardiogram (EKG)
- Tape drives
- DCS control intelligent sensor
- PDAs, game consoles
- Oscilloscopes
- Washing machine
