PIC24EP256MC202-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® 24EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Base Part Number | PIC24EP256MC202 |
| Pin Count | 28 |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 16K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 87381 |
| CPU Family | PIC |
| Number of ADC Channels | 6 |
| Number of I2C Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24EP256MC202-I/SP Overview
There is a 28-DIP (0.300, 7.62mm) package available to save space. A Through Hole mounting method is used. There is a Tube package available for it. A core processor of PIC is present in the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. A total of 21 I/Os are available on this device. It has a base part number of PIC24EP256MC202 that can be used to find other components that are comparable. The position of the device is DUAL at terminal. 28 terminations are present in it. Part of the PIC? 24EP series, this electrical component is used in a variety of applications. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. A number of 28 pins are used to construct it. There are 28 pins on it. It is one of the components included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 256kB. There is a source of power of 3.3V that powers this device. This device works well at 70MHz frequency when it is operating at a high rate of efficiency. The number of timers and counters is 5. The part is a part of the PIC CPU family. In order to maintain normal operation, Vsup must be above 3V. It works with an oscillator type Internal.
PIC24EP256MC202-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC24EP256MC202-I/SP Applications
There are a lot of Microchip Technology PIC24EP256MC202-I/SP Microcontroller applications.
- Communication-bluetooth, Wi-Fi, radio
- Projector
- Dishwashers
- Heater/Fan
- Fax machines
- Blood pressure monitors
- Telephone sets
- Printers
- Smartphone
- Dialysis machines (performs function of liver)
