PIC24EP256MC204-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® 24EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24EP256MC204 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 16K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 87381 |
| On Chip Program ROM Width | 24 |
| CPU Family | PIC |
| Number of PWM Channels | 6 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24EP256MC204-I/ML Overview
Due to the benefits of saving space, it is available in the 44-VQFN Exposed Pad package. A Surface Mount mounting method is used. It comes in a Tube package. A PIC core processor powers the device. Work should be performed at a temperature of -40°C~85°C TA. FLASH is the type of program memory used by it. The device has 35 I/Os. It has a part number of PIC24EP256MC204 that can be used to locate similar components. The terminals of this device are set to QUAD. As far as terminations are concerned, there are 44 terminations present. It is a member of the PIC? 24EP series of electrical components. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. A total of 44 pins are required to construct this device. This device has a total of 44 pins. It belongs to the subcategory Microcontrollers. A device with a memory size of 256kB can store programs and data. This device works well at 70MHz frequency when it is operating at a high rate of efficiency. While employing 3.3V, designers can maximize its supply voltage adaptability. The number of timers and counters is 5. It is a member of the PIC family of CPUs. Using a Internal oscillator type, it works well.
PIC24EP256MC204-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24EP256MC204-I/ML Applications
There are a lot of Microchip Technology PIC24EP256MC204-I/ML Microcontroller applications.
- Multi-meter
- Fabric
- Accu-check
- Kindle
- Entertainment products
- Gas monitoring systems
- Smart instruments
- Fire detection & safety devices
- Food and beverage
- Toys
