PIC24EP512GU810-I/PT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2010 |
| Series | PIC® 24EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24EP512GU810 |
| Pin Count | 100 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 536kB |
| Oscillator Type | Internal |
| Number of I/O | 83 |
| Nominal Supply Current | 13mA |
| RAM Size | 24K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 512KB 170K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART, USB OTG |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 9 |
| Address Bus Width | 16b |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 32 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 4 |
| Height | 1mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
PIC24EP512GU810-I/PT Overview
A space-saving advantage is that it is included in the 100-TQFP package. A Surface Mount mounting method is used. A package of Tray contains it. Devices with PIC core processors are available. It is important to keep the temperature at -40°C~85°C TA while working. There is FLASH program memory in it. A total of 83 I/Os are present. It has a part number of PIC24EP512GU810 that can be used to locate similar components. The terminals of this device are set to QUAD. Currently, it consists of 100 terminationals. It is a member of the PIC? 24EP series of electrical components. High efficiency is possible due to the 3.3V supply voltage. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. 100 pins are used to construct it. During the mounting process, the device is mounted based on the Surface Mount method. This device has a total of 100 pins. This is a component included in Microcontrollers. In order to store data and programs, the devices have a memory size of 536kB. A 3.3V source of power is being used to run it. Using a frequency of 60MHz, it is very efficient. A total of 9 timers/counters are present. This part is part of the PIC family of CPUs. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 3V. There is an oscillator type Internal used in this circuit.
PIC24EP512GU810-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24EP512GU810-I/PT Applications
There are a lot of Microchip Technology PIC24EP512GU810-I/PT Microcontroller applications.
- Dialysis machines (performs function of liver)
- Walkie talkies
- Hard drives
- Instrument control
- Air fryers
- Calculators
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Multi-meter
- Microwave ovens
- DVD\DV\MP3 players
