PIC24EP64GP202-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® 24EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Base Part Number | PIC24EP64GP202 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 4K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 22K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| On Chip Program ROM Width | 24 |
| CPU Family | PIC |
| Length | 34.671mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24EP64GP202-I/SP Overview
It is available in the 28-DIP (0.300, 7.62mm) package for the benefit of saving space. Through Hole is the way to mount it. In the package Tube, it is included. There is a PIC as core processor in this device. Work should be performed at a temperature of -40°C~85°C TA. Its type of program memory is FLASH. There are 21 I/Os on it. To find equivalent components, use its PIC24EP64GP202 base part number. At DUAL, its terminals are located. In this case, there are 28 terminationals. Part of the PIC? 24EP series, this electrical component is used in a variety of applications. Because the supply voltage is 3.3V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. It is constructed using 28 pins. It is equipped with 28 pins in total. It is one of the components included in Microcontrollers. The devices have a maximum memory size of 64kB that can be used to store programs and data. At a frequency of 70MHz, it exhibits excellent efficiency. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. 5 counters/timers are currently active. It is one of the members of the CPU family PIC. Internal is the oscillator type it uses.
PIC24EP64GP202-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC24EP64GP202-I/SP Applications
There are a lot of Microchip Technology PIC24EP64GP202-I/SP Microcontroller applications.
- Virtual reality VR robots
- Computed Tomography (CT scan)
- Walkie talkies
- Fabric
- Paper shredders
- Robots
- DCS control intelligent sensor
- Microwave ovens
- Fire detection & safety devices
- Hard drives
