PIC24F04KA201-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Frequency | 32MHz |
| Base Part Number | PIC24F04KA201 |
| Pin Count | 20 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 4KB 1.375K x 24 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Density | 32 kb |
| CPU Family | PIC |
| Low Power Mode | NO |
| Number of Programmable I/O | 12 |
| Integrated Cache | NO |
| RAM (words) | 256 |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 1 |
| Height | 4.953mm |
| Length | 26.924mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24F04KA201-I/P Overview
It is available in the 20-DIP (0.300, 7.62mm) package for the benefit of saving space. This is mounted using the Through Hole method. It is available in the Tube package. A core processor of PIC is present in the device. Work should be performed at a temperature of -40°C~85°C TA. In terms of its program memory type, it is FLASH. It has a number of 18I/Os. Based on its base part number of PIC24F04KA201, other similarly-sized components can be found. At DUAL, it has its terminals. There are a total of 20 terminations in it. An electrical component such as this is included in the series PIC? XLP? 24F. Because of the 3.3V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. A number of 20 pins are used to construct it. A method of mounting is used, which is Through Hole. This device has a total of 20 pins. It is one of the components included in Microcontrollers. A device with a memory size of 4kB can store programs and data. It performs extremely well at a frequency of 32MHz. 3 counters/timers are currently active. It is a member of the PIC family of CPUs. There are 12 programmable input/output ports on the chip. Normally, the supply voltage (Vsup) should remain above 3V. It works with an oscillator type Internal.
PIC24F04KA201-I/P Features
20-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC24F04KA201-I/P Applications
There are a lot of Microchip Technology PIC24F04KA201-I/P Microcontroller applications.
- Firewalls
- Copiers
- Computer/laptop
- Toasters
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Calculator
- Computers and laptops-video calling, email, blogging
- Wastewater treatment
- Computed Tomography (CT scan)
- Graphic terminals
