PIC24F04KA201T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24F04KA201 |
| Pin Count | 20 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 4KB 1.375K x 24 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 24 |
| CPU Family | PIC |
| Low Power Mode | NO |
| Number of Programmable I/O | 12 |
| Integrated Cache | NO |
| RAM (words) | 256 |
| On Chip Data RAM Width | 16 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24F04KA201T-I/SS Overview
There is a 20-SSOP (0.209, 5.30mm Width) package available to save space. In this case, it is mounted using the method of Surface Mount. Package Tape & Reel (TR) contains it. It is equipped with a PIC core processor. When working, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 18 I/Os on it, which makes it a very simple device. Based on its base part number of PIC24F04KA201, other similarly-sized components can be found. The terminals of this device are located at DUAL. It has 20 terminationals. An electrical component such as this is included in the series PIC? XLP? 24F. Because the supply voltage is 3.3V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. For its construction, 20 pins are used. The mounting of this device is carried out following the method of Surface Mount. In total, it has 20 pins. This is a component included in Microcontrollers. The devices have a maximum memory size of 4kB that can be used to store programs and data. It is highly efficient when it works at a frequency of 32MHz. 3 timers/counters are in use. The part is a part of the PIC CPU family. The number 12 represents the number of programmable I/O ports on the board. During normal operation, the supply voltage (Vsup) should be kept above 3V. Using an oscillator type Internal, it operates.
PIC24F04KA201T-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24F04KA201T-I/SS Applications
There are a lot of Microchip Technology PIC24F04KA201T-I/SS Microcontroller applications.
- Toasters
- Smart highways (navigation, traffic control, information monitoring and car service)
- Keyboards
- Calculator
- Projector
- Aerospace navigation systems
- Magnetic resonance imaging (MRI)
- Communication-bluetooth, Wi-Fi, radio
- Embedded gateways
- Measuring revolving objects
