PIC24F08KA101-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Base Part Number | PIC24F08KA101 |
| Pin Count | 20 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 8KB 2.75K x 24 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Density | 64 kb |
| EEPROM Size | 512 x 8 |
| CPU Family | PIC |
| Number of UART Channels | 2 |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 1 |
| Height | 4.953mm |
| Length | 26.92mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24F08KA101-I/P Overview
As a result, it is available in the 20-DIP (0.300, 7.62mm) package. Through Hole is the way to mount it. There is a Tube package available for it. With a processor of PIC cores, the device is powered. Work should be done at -40°C~85°C TA. FLASH is the type of program memory used by it. It has a number of 18I/Os. It has a base part number of PIC24F08KA101 that can be used to find other components that are comparable. DUAL is the position of its terminals on the board. In this case, there are 20 terminationals. In the PIC? XLP? 24F series, this electrical component is found. It is possible to achieve high efficiency with a 3.3V supply voltage. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. For its construction, 20 pins are used. Based on the Through Hole method, it is mounted. Total number of pins is 20. In Microcontrollers, this component is included. The devices have a memory size of 8kB that can be used to store programs and data. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. The number of timers and counters is 3. It is a member of the PIC family of CPUs. Normally, the supply voltage (Vsup) should remain above 3V. Using an oscillator type of Internal, it works.
PIC24F08KA101-I/P Features
20-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC24F08KA101-I/P Applications
There are a lot of Microchip Technology PIC24F08KA101-I/P Microcontroller applications.
- Printers
- Guidance-GPS
- Mice
- Ipad
- Magnetic resonance imaging (MRI)
- Current meter
- Playstation
- Blood pressure monitors
- Radio
- Digital cameras
