PIC24F08KL302-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES 1.8V AT 8MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24F08KL302 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 8KB 2.75K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 12mA |
| Bit Size | 16 |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 2730 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 24 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24F08KL302-I/ML Overview
For the purpose of saving space, it is available in the 28-VQFN Exposed Pad package. Surface Mount is used for mounting. A package of Tube contains it. It is equipped with a PIC core processor. Work should be done at -40°C~85°C TA. It has a type of program memory of FLASH. The device has 24 I/Os. A comparable component can be found by using the base part number PIC24F08KL302. The terminals of this device are located at QUAD. 28 terminations are present in it. Part of the PIC? XLP? 24F series, this electrical component is used in a variety of applications. By using a 3.3V voltage supply, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. The structure is composed of 28 pins. It has a total of 28 pins on it. It is one of the components included in Microcontrollers. Using the devices' 8kB memory size, you can store programs and data. Supply current is maximum at 12mA. A 2/3.3V power source powers it. This device achieves excellent efficiency at frequencies of 32MHz. A total of 4 timers/counters have been set up. It belongs to the PIC CPU family. There is also a property of ALSO OPERATES 1.8V AT 8MHZ on it. Normal operation requires a supply voltage (Vsup) above 3V. There is an oscillator type Internal used in this circuit.
PIC24F08KL302-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24F08KL302-I/ML Applications
There are a lot of Microchip Technology PIC24F08KL302-I/ML Microcontroller applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Air fryers
- Firewalls
- Current meter
- Industrial robot
- Printers
- Digital cameras
- Security systems
- Traditional industrial transformation
- Electronic jamming systems
