PIC24F16KA101-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24F16KA101 |
| Pin Count | 20 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 5.5K x 24 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Density | 128 kb |
| EEPROM Size | 512 x 8 |
| CPU Family | PIC |
| Number of UART Channels | 2 |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 1 |
| Height | 1.85mm |
| Length | 7.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24F16KA101-I/SS Overview
It is available in the 20-SSOP (0.209, 5.30mm Width) package for the benefit of saving space. Surface Mount is used for mounting. It comes in a Tube package. With a processor of PIC cores, the device is powered. Work should be done at -40°C~85°C TA. There is FLASH program memory in it. The device has 18 I/Os. To find equivalent components, use its PIC24F16KA101 base part number. At DUAL, it has its terminals. This circuit consists of 20 terminationals. PIC? XLP? 24F is the series number of this electrical component. The 3.3V supply voltage enables high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. For its construction, 20 pins are used. It is mounted based on the method of Surface Mount. Total number of pins is 20. It belongs to the subcategory Microcontrollers. In the device, there is a memory capacity of 16kB which may be used to store programs and data. It is highly efficient when it works at a frequency of 32MHz. 3 timer/counters are present. It is a member of the PIC family of CPUs. Normal operation requires a supply voltage (Vsup) that is higher than 3V. The oscillator type Internal is used to operate the device.
PIC24F16KA101-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24F16KA101-I/SS Applications
There are a lot of Microchip Technology PIC24F16KA101-I/SS Microcontroller applications.
- Heater/Fan
- Projector
- Mobile computers
- Automatic staplers
- Robots
- Ipod
- Computer/laptop
- Washing machines
- Dryers
- Set-top boxes
