PIC24F16KA301-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 24F |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Base Part Number | PIC24F16KA301 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 5.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 12x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS-16949 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Time-Min | SECONDS |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24F16KA301-E/SS Overview
To save space, it is included in the 20-SSOP (0.209, 5.30mm Width) package. Surface Mount is used for mounting. You can find it in the package of Tube. It is equipped with a PIC core processor. The temperature should be kept at -40°C~125°C TA while working. The type of memory in which this program is stored is FLASH. A total of 18 I/Os are present. Based on the PIC24F16KA301 base part number, it can be compared with other components. DUAL is the location of its terminals. Currently, it consists of 20 terminationals. This electrical component is part of the PIC? XLP? 24F series. The supply voltage of 3.3V allows for high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. A total of 20 pins are used in its construction. In the device, there is a memory capacity of 16kB which may be used to store programs and data. Working at a frequency of 32MHz results in excellent efficiency. In total, there are 5 timers and counters. Normally, the supply voltage (Vsup) should remain above 1.8V. Internal is the oscillator type it uses.
PIC24F16KA301-E/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
PIC24F16KA301-E/SS Applications
There are a lot of Microchip Technology PIC24F16KA301-E/SS Microcontroller applications.
- Automatic control
- Industrial robot
- Glucose monitoring systems (for Type 1 Diabetes)
- Computer/laptop
- Robotic prosthetic limbs
- Smart highways (navigation, traffic control, information monitoring and car service)
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Kindle
- Oscilloscopes
- Digital set-top boxes
