PIC24F16KA301-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Base Part Number | PIC24F16KA301 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 5.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 12x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS-16949 |
| Number of Programmable I/O | 17 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Time-Min | SECONDS |
| Length | 26.162mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24F16KA301-I/P Overview
To save space, it is included in the 20-DIP (0.300, 7.62mm) package. It is mounted using the way of Through Hole. Package Tube contains it. Devices with PIC core processors are available. Work should be performed at a temperature of -40°C~85°C TA. FLASH is its program memory type. There are 18 I/Os on the board. A component with the same part number as PIC24F16KA301 can be compared to other similar components. DUAL is the position of its terminals on the board. This circuit consists of 20 terminationals. An electrical component such as this is included in the series PIC? XLP? 24F. Because the supply voltage is 3.3V, high efficiency can be achieved. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. 20 pins are used to construct it. Based on the Through Hole method, it is mounted. Total number of pins is 20. In Microcontrollers, this component is included. In the device, there is a memory capacity of 16kB which may be used to store programs and data. A 2/3.3V source is used for powering it. At a frequency of 32MHz, it exhibits excellent efficiency. There are currently 5 timers/counters set up on the system. The number 17 represents the number of programmable I/O ports on the board. A supply voltage (Vsup) above 1.8V is necessary for normal operation. Internal is the oscillator type it uses.
PIC24F16KA301-I/P Features
20-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC24F16KA301-I/P Applications
There are a lot of Microchip Technology PIC24F16KA301-I/P Microcontroller applications.
- Vacuum cleaners
- Current meter
- Radio
- Paper shredders
- X-ray
- Oscilloscopes
- Air fryers
- Home appliances
- Auto-breaking system
- Automatic staplers
