PIC24F16KA302-E/SP
| Parameters | |
|---|---|
| Screening Level | TS-16949 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Time-Min | SECONDS |
| Length | 34.671mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 24F |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Base Part Number | PIC24F16KA302 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 5.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 18mA |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
PIC24F16KA302-E/SP Overview
It is available in the 28-DIP (0.300, 7.62mm) package for the benefit of saving space. Using Through Hole, it is mounted. This item can be found in package Tube. A core processor of PIC is present in the device. It is important to keep the temperature at -40°C~125°C TA while working. In terms of its program memory type, it is FLASH. A total of 24 I/Os are present. A comparable component can be found by using the base part number PIC24F16KA302. At DUAL, it has its terminals. It has 28 terminationals. An electrical component such as this is included in the series PIC? XLP? 24F. As a result of the 3.3V supply voltage, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A total of 28 pins are used in its construction. Based on the Through Hole method, it is mounted. In the device, there is a memory capacity of 16kB which may be used to store programs and data. It is important to note that the maximum supply current is 18mA. The system is highly efficient when working at a frequency of 32MHz. It appears that there are 5 timers/counters in use. During normal operation, the supply voltage (Vsup) should be kept above 1.8V. Internal is the oscillator type it uses.
PIC24F16KA302-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
PIC24F16KA302-E/SP Applications
There are a lot of Microchip Technology PIC24F16KA302-E/SP Microcontroller applications.
- Medical instruments chromatographs
- Digital set-top boxes
- Oscilloscopes
- Projectors
- Fax machines
- Industrial instrumentation devices
- DCS control intelligent sensor
- Volt meter
- Measuring revolving objects
- Automatic staplers
