PIC24F16KA302-I/SP
| Parameters | |
|---|---|
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Base Part Number | PIC24F16KA302 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 5.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 18mA |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS-16949 |
| Number of Programmable I/O | 23 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Time-Min | SECONDS |
| Length | 34.671mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
PIC24F16KA302-I/SP Overview
As a result, it is available in the 28-DIP (0.300, 7.62mm) package. A Through Hole mounting method is used. Tube is the package that contains it. There is a PIC as core processor in this device. Maintain a temperature of -40°C~85°C TA while working. FLASH is its program memory type. 24 I/Os have been provided by the device. It has a base part number of PIC24F16KA302 that can be used to find other components that are comparable. The position of the device is DUAL at terminal. There are a total of 28 terminations in it. The PIC? XLP? 24F series contains this electrical component. As a result of the 3.3V supply voltage, high efficiency is possible. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. It is constructed with 28 pins. The method of Through Hole is used to mount it. On it, there are 28 pins. In Microcontrollers, this component is included. Using the devices' 16kB memory size, you can store programs and data. In this case, 18mA represents the maximum current supply. There is 2/3.3V power source in this device. The system is highly efficient when working at a frequency of 32MHz. The number of timers and counters is 5. A chip with 23 programmable inputs/outputs is available. During normal operation, the supply voltage (Vsup) should be kept above 1.8V. Using a Internal oscillator type, it works well.
PIC24F16KA302-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC24F16KA302-I/SP Applications
There are a lot of Microchip Technology PIC24F16KA302-I/SP Microcontroller applications.
- Current meter
- Set-top boxes
- Fax machines
- Temperature sensing and controlling devices
- Mobile computers
- Entertainment-radios, CD players, televisions
- Binding machines
- Electronic jamming systems
- Switches
- Safety -airbags, automatic braking system (ABS)
