PIC24F16KA302T-I/ML
| Parameters | |
|---|---|
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 5.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 18mA |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS-16949 |
| Number of Programmable I/O | 23 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Time-Min | SECONDS |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24F16KA302 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
PIC24F16KA302T-I/ML Overview
Due to its space-saving qualities, it is available in the 28-VQFN Exposed Pad package. Surface Mount is used for mounting. In the package Tape & Reel (TR), it is included. With a processor of PIC cores, the device is powered. Work should be performed at a temperature of -40°C~85°C TA. The type of memory it uses is FLASH. There are 24 I/Os on the board. It has a part number of PIC24F16KA302 that can be used to locate similar components. The terminals of this device are located at QUAD. It has 28 terminationals. PIC? XLP? 24F is the series number of this electrical component. As a result of the 3.3V supply voltage, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. There are 28 pins used in the construction of this device. A method of mounting is used, which is Surface Mount. There are a total of 28 pins on it. The component is included in Microcontrollers. The devices have a memory size of 16kB that can be used to store programs and data. A maximum supply current of 18mA is set. Power is provided by a 2/3.3V source. It is highly efficient when it works at a frequency of 32MHz. 5 timers/counters are in use. The number 23 represents the number of programmable I/O ports on the board. Normally, the supply voltage (Vsup) should remain above 1.8V. An oscillator of type Internal is used.
PIC24F16KA302T-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24F16KA302T-I/ML Applications
There are a lot of Microchip Technology PIC24F16KA302T-I/ML Microcontroller applications.
- Industrial robot
- Digital set-top boxes
- DVD\DV\MP3 players
- Home video and audio
- ECG machine
- Washing machines
- Kindle
- Guidance-GPS
- Leakage current tester
- Home appliances
