PIC24F16KA302T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24F16KA302 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 5.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 18mA |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS-16949 |
| Number of Programmable I/O | 23 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Time-Min | SECONDS |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24F16KA302T-I/SS Overview
There is a 28-SSOP (0.209, 5.30mm Width) package available to save space. This is mounted using the Surface Mount method. Tape & Reel (TR) is the package that contains it. The device runs in PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. The type of memory it uses is FLASH. There are 24 I/Os on it, which makes it a very simple device. A comparable component can be found by using the base part number PIC24F16KA302. DUAL is the location of its terminals. There are a total of 28 terminations in it. The electrical component is part of the series PIC? XLP? 24F. High efficiency is possible due to the 3.3V supply voltage. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. A total of 28 pins are used in its construction. During the mounting process, the device is mounted based on the Surface Mount method. Total number of pins is 28. It falls under the category of Microcontrollers. In order to store data and programs, the devices have a memory size of 16kB. In this case, 18mA represents the maximum current supply. A 2/3.3V source of power is being used to run it. When working at a frequency of 32MHz it is able to achieve excellent efficiency. The number of timers and counters is 5. There are a total of 23 programmable I/Os available. For normal operation, the supply voltage (Vsup) should be kept above 1.8V. The oscillator type Internal is used to operate the device.
PIC24F16KA302T-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24F16KA302T-I/SS Applications
There are a lot of Microchip Technology PIC24F16KA302T-I/SS Microcontroller applications.
- Mice
- Speed meter
- Dialysis machines (performs function of liver)
- Multi-meter
- Current meter
- Automatic control
- Television
- Industrial robot
- Fabric
- Leakage current tester
