PIC24F16KA304T-I/MV
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-UFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | OPERATES WITH 1.8 V MINIMUM SUPPLY AT 8 MHZ |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24F16KA304 |
| Pin Count | 48 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 39 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 5.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 512 x 8 |
| Number of Programmable I/O | 38 |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24F16KA304T-I/MV Overview
As a result, it is available in the 48-UFQFN Exposed Pad package. The way of mounting it is Surface Mount. It is available in the Tape & Reel (TR) package. With a processor of PIC cores, the device is powered. The temperature should be kept at -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. There are 39 I/Os on the board. A component with the same part number as PIC24F16KA304 can be compared to other similar components. QUAD is the position of its terminals on the board. As far as terminations are concerned, there are 48 terminations present. In the PIC? XLP? 24F series, this electrical component is found. Because the supply voltage is 3.3V, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. A number of 48 pins are used to construct it. There are 48 pins on it. Data and programs can be stored on the devices with a memory size of 16kB. Using a frequency of 32MHz, it is very efficient. In total, there are 5 timers and counters. There are a total of 38 programmable I/Os. There is also the property of OPERATES WITH 1.8 V MINIMUM SUPPLY AT 8 MHZ associated with it. Normally, the supply voltage (Vsup) should remain above 3V. An oscillator type Internal is required for it to work.
PIC24F16KA304T-I/MV Features
48-UFQFN Exposed Pad package
Mounting type of Surface Mount
PIC24F16KA304T-I/MV Applications
There are a lot of Microchip Technology PIC24F16KA304T-I/MV Microcontroller applications.
- Leakage current tester
- Food and beverage
- Radio
- Telephone sets
- Calculators
- Playstation
- Electromechanical control
- Home video and audio
- Answering machines
- Heart rate monitors
