PIC24F16KL401-I/MQ
| Parameters | |
|---|---|
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES 1.8V AT 8MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24F16KL401 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| Nominal Supply Current | 2.7mA |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 5.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 4 |
| Address Bus Width | 16b |
| EEPROM Size | 512 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 12 |
| Number of I2C Channels | 2 |
| Height | 950μm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
PIC24F16KL401-I/MQ Overview
To save space, it is included in the 20-VQFN Exposed Pad package. A Surface Mount mounting method is used. There is a Tube package available for it. There is a PIC as core processor in this device. It is important to keep the temperature at -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. It has a number of 18I/Os. A comparable component can be found by using the base part number PIC24F16KL401. A QUAD position is assigned to its terminals. It has 20 terminationals. It is a member of the PIC? XLP? 24F series of electrical components. Because of the 3.3V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. 20 pins are used to construct it. In total, it has 20 pins. The component is included in Microcontrollers. The devices have a memory size of 16kB that can be used to store programs and data. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. A total of 4 timers/counters have been set up. It belongs to the PIC CPU family. There is also a property of ALSO OPERATES 1.8V AT 8MHZ on it. Normal operation requires a supply voltage (Vsup) that is higher than 3V. The oscillator type Internal is used to operate the device.
PIC24F16KL401-I/MQ Features
20-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24F16KL401-I/MQ Applications
There are a lot of Microchip Technology PIC24F16KL401-I/MQ Microcontroller applications.
- Paper shredders
- Instrument control
- Blenders
- Smart instruments
- Process control devices
- Robots
- Radio
- Heater/Fan
- Teletext terminals
- Temperature sensing and controlling devices
