PIC24F16KL401T-I/MQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES 1.8V AT 8MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24F16KL401 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 5.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 12mA |
| Bit Size | 16 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 24 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24F16KL401T-I/MQ Overview
There is a 20-VQFN Exposed Pad package available to save space. This is mounted using the Surface Mount method. You can find it in the package of Tape & Reel (TR). The device has a PIC core processor. When working, the temperature should be kept at -40°C~85°C TA. The type of memory it uses is FLASH. The device has 18 I/Os. Based on the PIC24F16KL401 base part number, it can be compared with other components. At QUAD, it has its terminals. 20 terminations are present in it. Part of the PIC? XLP? 24F series, this electrical component is used in a variety of applications. Because of the 3.3V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. 20 pins are used to construct it. A total of 20 pins are attached to it. Microcontrollers contains this component. Data and programs can be stored on the devices with a memory size of 16kB. 12mA is the maximum supply current. There is a source of power of 2/3.3V that powers this device. The system is highly efficient when working at a frequency of 32MHz. There are currently 4 timers/counters set up on the system. This part is part of the PIC family of CPUs. Moreover, it also has the property of ALSO OPERATES 1.8V AT 8MHZ. In order to maintain normal operation, Vsup must be above 3V. Internal is the oscillator type it uses.
PIC24F16KL401T-I/MQ Features
20-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24F16KL401T-I/MQ Applications
There are a lot of Microchip Technology PIC24F16KL401T-I/MQ Microcontroller applications.
- Electronic jamming systems
- 3D printers
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Robotic prosthetic limbs
- Kindle
- Current meter
- Teletext terminals
- ECG machine
- Accu-check
- Keyboards
