PIC24F32KA302-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 24F |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Base Part Number | PIC24F32KA302 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 11K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 18mA |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 10922 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS-16949 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Time-Min | SECONDS |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24F32KA302-E/ML Overview
To save space, it is included in the 28-VQFN Exposed Pad package. Surface Mount is the way to mount it. It comes in the package?of a Tube. PIC core processor is present on the device. It is important to keep the temperature at -40°C~125°C TA while working. The type of memory it uses is FLASH. It has a number of 24I/Os. A component with the same part number as PIC24F32KA302 can be compared to other similar components. The position of the device is QUAD at terminal. It consists of 28 terminationals. Part of the PIC? XLP? 24F series, this electrical component is used in a variety of applications. High efficiency is possible due to the 3.3V supply voltage. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. There are 28 pins used in the construction of this device. Memory size for the devices is 32kB, which can be used to store programs and data. The maximum supply current is set at 18mA. At a frequency of 32MHz, it exhibits excellent efficiency. 5 counters/timers are currently active. In order to maintain normal operation, Vsup must be above 1.8V. Using an oscillator type of Internal, it works.
PIC24F32KA302-E/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
PIC24F32KA302-E/ML Applications
There are a lot of Microchip Technology PIC24F32KA302-E/ML Microcontroller applications.
- Multi-meter
- Smoke alarms
- Electrocardiogram (EKG)
- Accu-check
- Scanners
- Equipment control
- Mobile computers
- Set-top boxes
- Radio
- Volt meter
