PIC24F32KA302-E/SP
| Parameters | |
|---|---|
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 11K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 18mA |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 10922 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS-16949 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Time-Min | SECONDS |
| Length | 34.671mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 24F |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Base Part Number | PIC24F32KA302 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
PIC24F32KA302-E/SP Overview
It is available in the 28-DIP (0.300, 7.62mm) package for the benefit of saving space. The way of mounting it is Through Hole. There is a Tube package available for it. Devices with PIC core processors are available. Working at -40°C~125°C TA temperature is recommended. In terms of its program memory type, it is FLASH. 24 I/Os can be found on it. To find comparable components, use the PIC24F32KA302 base part number. DUAL is the position of its terminals on the board. There are a total of 28 terminations in it. An electrical component such as this is included in the series PIC? XLP? 24F. Because of the 3.3V voltage of the supply, high efficiency can be achieved. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. A total of 28 pins are used in its construction. Data and programs can be stored on the devices with a memory size of 32kB. In this case, 18mA represents the maximum current supply. It performs extremely well at a frequency of 32MHz. 5 timer/counters are present. In order to maintain normal operation, Vsup must be above 1.8V. The oscillator type Internal is used to operate the device.
PIC24F32KA302-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
PIC24F32KA302-E/SP Applications
There are a lot of Microchip Technology PIC24F32KA302-E/SP Microcontroller applications.
- Guidance-GPS
- Electrocardiogram (EKG)
- Computed Tomography (CT scan)
- Blood pressure monitors
- Dishwashers
- Safety -airbags, automatic braking system (ABS)
- Fax machines
- Entertainment-radios, CD players, televisions
- Paper shredders
- Digital TVs
