PIC24F32KA302-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Base Part Number | PIC24F32KA302 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 11K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| EEPROM Size | 512 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 23 |
| Number of ADC Channels | 13 |
| Number of PWM Channels | 3 |
| Number of I2C Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24F32KA302-I/SP Overview
It is available in the 28-DIP (0.300, 7.62mm) package for the benefit of saving space. Mounted using Through Hole. In the package Tube, it is included. Device with PIC core processor issupported. Work should be done at -40°C~85°C TA. Memory type FLASH is used for program memory. It has a number of 24I/Os. Based on the PIC24F32KA302 base part number, it can be compared with other components. DUAL is the position of its terminals on the board. A 28 termination is contained within it. The electrical component is part of the series PIC? XLP? 24F. As a result of the 3.3V supply voltage, high efficiency is possible. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. It is constructed with 28 pins. Based on the Through Hole method, it is mounted. It has a total of 28 pins on it. This component is a part of Microcontrollers. Using the devices' 32kB memory size, you can store programs and data. The system is highly efficient when working at a frequency of 32MHz. In total, there are 5 timers and counters. This part is part of the PIC family of CPUs. There are 23 programmable I/Os in the device. During normal operation, the supply voltage (Vsup) should be kept above 3V. There is an oscillator type Internal used in this circuit.
PIC24F32KA302-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC24F32KA302-I/SP Applications
There are a lot of Microchip Technology PIC24F32KA302-I/SP Microcontroller applications.
- Copiers
- Fax machines
- Robots
- Medical instruments chromatographs
- Ipad
- Instrument control
- Heater/Fan
- Tape drives
- Mobile computers
- Dialysis machines (performs function of liver)
