PIC24F32KA304T-I/ML
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 39 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 11K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 18mA |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 10922 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS-16949 |
| Number of Programmable I/O | 38 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Time-Min | SECONDS |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24F32KA304 |
| Pin Count | 44 |
PIC24F32KA304T-I/ML Overview
For the purpose of saving space, it is available in the 44-VQFN Exposed Pad package. This is mounted using the Surface Mount method. You can find it in the package of Tape & Reel (TR). A core processor of PIC is present in the device. The temperature should be kept at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. 39 I/Os are present on the device. It has a base part number of PIC24F32KA304 that can be used to find other components that are comparable. At QUAD, its terminals are located. In this case, there are 44 terminationals. The PIC? XLP? 24F series contains this electrical component. The supply voltage of 3.3V allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. The structure is constructed from 44 pins. It is mounted based on the method of Surface Mount. In total, it has 44 pins. It falls under the category of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 32kB. It is important to note that the maximum supply current is 18mA. Powered by a 2/3.3V source. Working at a frequency of 32MHz results in excellent efficiency. 5 timers/counters are in use. There are a total of 38 programmable I/Os. A supply voltage (Vsup) above 1.8V is necessary for normal operation. Using an oscillator type Internal, it operates.
PIC24F32KA304T-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24F32KA304T-I/ML Applications
There are a lot of Microchip Technology PIC24F32KA304T-I/ML Microcontroller applications.
- Digital cameras
- Copiers
- Graphic terminals
- Air fryers
- Hard drives
- Radio
- Microwave ovens
- Digital set-top boxes
- Washing machine
- Medical instruments chromatographs
