PIC24F32KA304T-I/MV
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-UFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24F32KA304 |
| Pin Count | 48 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 39 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 11K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 18mA |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 10922 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS-16949 |
| Number of Programmable I/O | 38 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Time-Min | SECONDS |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24F32KA304T-I/MV Overview
A space-saving advantage is that it is included in the 48-UFQFN Exposed Pad package. The way of mounting it is Surface Mount. Package Tape & Reel (TR) contains it. There is a PIC as core processor in this device. Work should be done at -40°C~85°C TA. Its type of program memory is FLASH. There are 39 I/Os on it. A component with the same part number as PIC24F32KA304 can be compared to other similar components. The position of the device is QUAD at terminal. This circuit consists of 48 terminationals. It is a member of the PIC? XLP? 24F series of electrical components. Because the supply voltage is 3.3V, high efficiency can be achieved. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. 48 pins are used to construct it. In total, it has 48 pins. In Microcontrollers, this component is included. The devices have a memory size of 32kB that can be used to store programs and data. It should be noted that 18mA represents the maximum supply current. Powered by a 2/3.3V source. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. There are 5 timers/counters. There are 38 programmable I/Os. Vsup should be kept above 1.8V for normal operation. Using a Internal oscillator type, it works well.
PIC24F32KA304T-I/MV Features
48-UFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24F32KA304T-I/MV Applications
There are a lot of Microchip Technology PIC24F32KA304T-I/MV Microcontroller applications.
- Paper shredders
- Torpedo guidance
- Wastewater treatment
- Walkie talkies
- Washing machines
- Air fryers
- Oscilloscopes
- Ipod
- Playstation
- Radio
