PIC24F32KA304T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24F32KA304 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 39 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 11K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 18mA |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 10922 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS-16949 |
| Number of Programmable I/O | 38 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Time-Min | SECONDS |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24F32KA304T-I/PT Overview
Due to its space-saving qualities, it is available in the 44-TQFP package. Surface Mount is used for mounting. Package Tape & Reel (TR) contains it. With a processor of PIC cores, the device is powered. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 39 I/Os on it. A comparable component can be found by using the base part number PIC24F32KA304. At QUAD, its terminals are located. Currently, it consists of 44 terminationals. It is a member of the PIC? XLP? 24F series of electrical components. As a result of the 3.3V supply voltage, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. For its construction, 44 pins are used. The mounting of this device is carried out following the method of Surface Mount. 44 pins are on it in total. In Microcontrollers, this component is included. The devices have a memory size of 32kB that can be used to store programs and data. It should be noted that 18mA represents the maximum supply current. A 2/3.3V source is used for powering it. When working at a frequency of 32MHz it is able to achieve excellent efficiency. The number of timers and counters is 5. 38 is the number of programmable I/O. For normal operation, the supply voltage (Vsup) should be kept above 1.8V. Internal is the oscillator type it uses.
PIC24F32KA304T-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24F32KA304T-I/PT Applications
There are a lot of Microchip Technology PIC24F32KA304T-I/PT Microcontroller applications.
- DCS control intelligent sensor
- Equipment control
- Broadband technology, video and voice processing
- Toasters
- Guidance-GPS
- Tape drives
- Instrument control
- Petrochemical
- Fire detection & safety devices
- Fax machines
