PIC24FJ128DA106-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2008 |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FJ128DA106 |
| Pin Count | 64 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.2V |
| Interface | I2C, IrDA, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| Nominal Supply Current | 12mA |
| RAM Size | 24K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, GFX, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | I2C, IrDA, SPI, UART/USART, USB OTG |
| Bit Size | 16 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| ROM (words) | 131072 |
| CPU Family | PIC |
| Number of Programmable I/O | 29 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 9 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24FJ128DA106-I/PT Overview
Due to its space-saving qualities, it is available in the 64-TQFP package. Surface Mount is used for mounting. It is available in the Tray package. A PIC core processor powers the device. Work should be done at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 52 I/Os have been provided by the device. Other components that are comparable to it have the base part number PIC24FJ128DA106. A QUAD position is assigned to its terminals. 64 terminations are present in it. This electrical component is part of the PIC? 24F series. As a result of the 3.3V supply voltage, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. It is constructed using 64 pins. On it, there are 64 pins. It is one of the components included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 128kB. At a frequency of 32MHz, it exhibits excellent efficiency. A total of 5 timers/counters have been set up. This part is an integral part of the PIC CPU family. There are 29 programmable I/Os in the device. A supply voltage (Vsup) above 2.2V is necessary for normal operation. There is an oscillator type Internal used in this circuit.
PIC24FJ128DA106-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ128DA106-I/PT Applications
There are a lot of Microchip Technology PIC24FJ128DA106-I/PT Microcontroller applications.
- Speed meter
- Instrument control
- Projectors
- Electrocardiogram (EKG)
- Hand-held metering systems
- Measuring revolving objects
- Wastewater treatment
- Calculator
- Digital cameras
- Sonography (Ultrasound imaging)
