PIC24FJ128DA210-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FJ128DA210 |
| Pin Count | 100 |
| Supply Voltage-Min (Vsup) | 2.2V |
| Interface | I2C, IrDA, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 84 |
| Nominal Supply Current | 12mA |
| RAM Size | 96K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, GFX, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | I2C, IrDA, SPI, UART/USART, USB OTG |
| Bit Size | 16 |
| Data Converter | A/D 24x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| CPU Family | PIC |
| Number of UART Channels | 4 |
| Number of ADC Channels | 24 |
| Number of PWM Channels | 9 |
| Number of I2C Channels | 3 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24FJ128DA210-I/PT Overview
To save space, it is included in the 100-TQFP package. In this case, it is mounted using the method of Surface Mount. There is a Tray package available for it. A PIC core processor powers the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. 84 I/Os can be found on it. A comparable component can be found by using the base part number PIC24FJ128DA210. At QUAD, its terminals are located. 100 terminations are present in it. The PIC? 24F series contains this electrical component. The 3.3V supply voltage enables high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. It is constructed using 100 pins. During the mounting process, the device is mounted based on the Surface Mount method. This device has a total of 100 pins. Microcontrollers contains this component. Data and programs can be stored on the devices with a memory size of 128kB. Using a frequency of 32MHz, it is very efficient. A total of 5 timers/counters have been set up. It is a member of the PIC family of CPUs. Normal operation requires a supply voltage (Vsup) above 2.2V. Internal is the oscillator type it uses.
PIC24FJ128DA210-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ128DA210-I/PT Applications
There are a lot of Microchip Technology PIC24FJ128DA210-I/PT Microcontroller applications.
- Torpedo guidance
- Microwave ovens
- Refrigerators
- Smart instruments
- Data acquisition and control
- Christmas lights
- Wastewater treatment
- Ipod
- Printers
- Paper shredders
