PIC24FJ128GA006-I/PT
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FJ128GA006 |
| Pin Count | 64 |
| Lead Pitch | 500μm |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| Nominal Supply Current | 15mA |
| RAM Size | 8K x 8 |
| Memory Type | FLASH, SRAM |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | I2C, PMP, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Access Time | 16 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Address Bus Width | 16b |
| Density | 1 Mb |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 54 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 5 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
PIC24FJ128GA006-I/PT Overview
To save space, it is included in the 64-TQFP package. The way of Surface Mount is used to mount it. There is a Tray package available for it. A PIC core processor powers the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 53 I/Os on it, which makes it a very simple device. Other components that are comparable to it have the base part number PIC24FJ128GA006. QUAD is the position of its terminals on the board. There are a total of 64 terminations in it. The PIC? 24F series includes this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. As a storage type for data, FLASH, SRAM is used. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. There are 64 pins used in the construction of this device. A method of mounting is used, which is Surface Mount. A total of 64 pins are attached to it. In Microcontrollers, this component is included. The devices have a memory size of 128kB that can be used to store programs and data. This device works well at 16MHz frequency when it is operating at a high rate of efficiency. It is one of the members of the CPU family PIC. There are 54 programmable I/Os in the device. During normal operation, the supply voltage (Vsup) should be kept above 2V. An oscillator of type Internal is used.
PIC24FJ128GA006-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ128GA006-I/PT Applications
There are a lot of Microchip Technology PIC24FJ128GA006-I/PT Microcontroller applications.
- Telephone sets
- Data acquisition and control
- Calculators
- Temperature sensing and controlling devices
- Magnetic resonance imaging (MRI)
- Set-top boxes
- Smart instruments
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Fire alarms
- Mobile computers
