PIC24FJ128GA108T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FJ128GA108 |
| Pin Count | 80 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 69 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | I2C, PMP, SPI, UART/USART |
| Supply Current-Max | 24mA |
| Bit Size | 16 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 131072 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24FJ128GA108T-I/PT Overview
There is a 80-TQFP package available to save space. Surface Mount is used for mounting. You can find it in the package of Tape & Reel (TR). Devices with PIC core processors are available. Work should be performed at a temperature of -40°C~85°C TA. FLASH has been assigned to it as a program memory. 69 I/Os have been provided by the device. A component with the same part number as PIC24FJ128GA108 can be compared to other similar components. A QUAD position is assigned to its terminals. Currently, it consists of 80 terminationals. Part of the PIC? 24F series, this electrical component is used in a variety of applications. The 3.3V supply voltage enables high efficiency. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. 80 pins are used to construct it. A method of mounting is used, which is Surface Mount. 80 pins are on it in total. Microcontrollers contains this component. The devices have a maximum memory size of 128kB that can be used to store programs and data. 24mA is the maximum supply current. At a frequency of 32MHz, it exhibits excellent efficiency. In total, there are 5 timers and counters. This part is an integral part of the PIC CPU family. Normal operation requires a supply voltage (Vsup) above 2V. Using an oscillator type Internal, it operates.
PIC24FJ128GA108T-I/PT Features
80-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ128GA108T-I/PT Applications
There are a lot of Microchip Technology PIC24FJ128GA108T-I/PT Microcontroller applications.
- Playstation
- Hand-held metering systems
- Hard drives
- Virtual reality VR robots
- Mobile computers
- Blood pressure monitors
- Computed Tomography (CT scan)
- Computer/laptop
- Embedded gateways
- Security systems
