PIC24FJ128GB210-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FJ128GB210 |
| Pin Count | 100 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.2V |
| Interface | I2C, IrDA, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 84 |
| Nominal Supply Current | 12mA |
| RAM Size | 96K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | I2C, IrDA, SPI, UART/USART, USB OTG |
| Bit Size | 16 |
| Data Converter | A/D 24x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| ROM (words) | 131072 |
| On Chip Program ROM Width | 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 44 |
| Number of ADC Channels | 24 |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24FJ128GB210-I/PT Overview
For space savings, it is available in the 100-TQFP package. This is mounted using the Surface Mount method. It comes in a Tray package. There is a PIC as core processor in this device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. 84 I/Os are present on the device. To find equivalent components, use its PIC24FJ128GB210 base part number. The terminals of this device are set to QUAD. In this case, there are 100 terminationals. The PIC? 24F series includes this electrical component. By using a 3.3V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. The structure is composed of 100 pins. There are 100 pins on it. It is one of the components included in Microcontrollers. In order to store data and programs, the devices have a memory size of 128kB. The system is highly efficient when working at a frequency of 32MHz. A total of 5 timers/counters have been set up. As part of the PIC CPU family, this component is included. 44 is the number of programmable I/O. A supply voltage (Vsup) above 2.2V is necessary for normal operation. There is an oscillator type Internal used in this circuit.
PIC24FJ128GB210-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ128GB210-I/PT Applications
There are a lot of Microchip Technology PIC24FJ128GB210-I/PT Microcontroller applications.
- Blood pressure monitors
- Heart rate monitors
- Hard drives
- Light sensing & controlling devices
- Paper shredders
- Microwave ovens
- Traditional industrial transformation
- Heater/Fan
- Sonography (Ultrasound imaging)
- Wastewater treatment
