PIC24FJ16MC101-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FJ16MC101 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 15 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 5.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 21mA |
| Bit Size | 16 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 8 |
| CPU Family | PIC |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 512 |
| On Chip Data RAM Width | 16 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24FJ16MC101-I/SS Overview
There is a 20-SSOP (0.209, 5.30mm Width) package available to save space. Mounted using Surface Mount. It comes in the package?of a Tube. A PIC core processor powers the device. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. There are 15 I/Os on the board. To find comparable components, use the PIC24FJ16MC101 base part number. A DUAL position is assigned to its terminals. It consists of 20 terminationals. It is a member of the PIC? 24F series of electrical components. The supply voltage of 3.3V allows for high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. A total of 20 pins are required to construct this device. A method of mounting is used, which is Surface Mount. On it, there are 20 pins. This component is a part of Microcontrollers. In the device, there is a memory capacity of 16kB which may be used to store programs and data. The maximum supply current is set at 21mA. Using a frequency of 32MHz, it is very efficient. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. 3 counters/timers are currently active. It is a member of the PIC family of CPUs. Using a Internal oscillator type, it works well.
PIC24FJ16MC101-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ16MC101-I/SS Applications
There are a lot of Microchip Technology PIC24FJ16MC101-I/SS Microcontroller applications.
- Aerospace navigation systems
- Accu-check
- Routers
- Computer/laptop
- Coffee machines
- Heater/Fan
- Electronic jamming systems
- Equipment control
- Firewalls
- Xbox
