PIC24FJ256DA110-I/BG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 121-TFBGA |
| Surface Mount | YES |
| Number of Pins | 121 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2008 |
| Series | PIC® 24F |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 121 |
| Terminal Finish | TIN SILVER COPPER |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 32MHz |
| Base Part Number | PIC24FJ256DA110 |
| Pin Count | 121 |
| Supply Voltage-Min (Vsup) | 2.2V |
| Interface | I2C, IrDA, RS-232, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 84 |
| Nominal Supply Current | 12mA |
| RAM Size | 24K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, GFX, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | I2C, IrDA, SPI, UART/USART, USB OTG |
| Bit Size | 16 |
| Data Converter | A/D 24x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| CPU Family | PIC |
| Number of Programmable I/O | 23 |
| Number of UART Channels | 4 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 9 |
| Number of I2C Channels | 3 |
| Height | 650μm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24FJ256DA110-I/BG Overview
There is a 121-TFBGA package available to save space. It is mounted using the way of Surface Mount. This item can be found in package Tray. There is a PIC as core processor in this device. Maintain a temperature of -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 84 I/Os on it, which makes it a very simple device. It has a base part number of PIC24FJ256DA110 that can be used to find other components that are comparable. BOTTOM is the location of its terminals. It consists of 121 terminationals. This electrical component is part of the PIC? 24F series. The supply voltage of 3.3V allows for high efficiency. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. For its construction, 121 pins are used. Total number of pins is 121. The component is included in Microcontrollers. Memory size for the devices is 256kB, which can be used to store programs and data. This device achieves excellent efficiency at frequencies of 32MHz. It appears that there are 5 timers/counters in use. This part is an integral part of the PIC CPU family. A chip with 23 programmable inputs/outputs is available. Normal operation requires a supply voltage (Vsup) that is higher than 2.2V. Using an oscillator type Internal, it operates.
PIC24FJ256DA110-I/BG Features
121-TFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ256DA110-I/BG Applications
There are a lot of Microchip Technology PIC24FJ256DA110-I/BG Microcontroller applications.
- Heart rate monitors
- Glucose monitoring systems (for Type 1 Diabetes)
- Pacemakers (used to control abnormal heart rhythm)
- Industrial robot
- Process control devices
- Smart highways (navigation, traffic control, information monitoring and car service)
- Electromechanical control
- DCS control intelligent sensor
- Instrument control
- Process control devices
