PIC24FJ256GA106-I/MR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FJ256GA106 |
| Pin Count | 64 |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | I2C, PMP, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 2 Mb |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of UART Channels | 4 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 9 |
| Number of I2C Channels | 3 |
| Height | 950μm |
| Length | 9mm |
| Width | 9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24FJ256GA106-I/MR Overview
There is a 64-VFQFN Exposed Pad package available to save space. It is mounted using the way of Surface Mount. A package of Tube contains it. There is a PIC as core processor in this device. Work should be done at -40°C~85°C TA. Its type of program memory is FLASH. There are 53 I/Os on it, which makes it a very simple device. Based on the PIC24FJ256GA106 base part number, it can be compared with other components. A QUAD position is assigned to its terminals. This circuit consists of 64 terminationals. The electrical component is part of the series PIC? 24F. As a result of the 3.3V supply voltage, high efficiency is possible. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. A total of 64 pins are used in its construction. As a result, it is mounted in accordance with Surface Mount. A total of 64 pins are attached to it. Microcontrollers contains this component. Memory size for the devices is 256kB, which can be used to store programs and data. It performs extremely well at a frequency of 32MHz. There are currently 5 timers/counters set up on the system. As part of the PIC CPU family, this component is included. Normal operation requires a supply voltage (Vsup) above 2V. It works with an oscillator type Internal.
PIC24FJ256GA106-I/MR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ256GA106-I/MR Applications
There are a lot of Microchip Technology PIC24FJ256GA106-I/MR Microcontroller applications.
- Fax machines
- Mice
- Virtual reality VR robots
- Broadband technology, video and voice processing
- Paper shredders
- DDC control
- Copiers
- Leakage current tester
- Microwave ovens
- Gas monitoring systems
