PIC24FJ256GA110-I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2008 |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FJ256GA110 |
| Pin Count | 100 |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | I2C, PMP, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 2 Mb |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of UART Channels | 4 |
| Number of ADC Channels | 16 |
| ROM Programmability | EEPROM |
| Number of PWM Channels | 9 |
| Number of I2C Channels | 3 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24FJ256GA110-I/PF Overview
Due to the benefits of saving space, it is available in the 100-TQFP package. Using Surface Mount, it is mounted. A package of Tray contains it. It is equipped with a PIC core processor. Maintain a temperature of -40°C~85°C TA while working. It has a type of program memory of FLASH. There are 85 I/Os on the board. Based on its base part number of PIC24FJ256GA110, other similarly-sized components can be found. A QUAD position is assigned to its terminals. As far as terminations are concerned, there are 100 terminations present. The electrical component is part of the series PIC? 24F. As a result of the 3.3V supply voltage, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 100 pins are used in its construction. It is mounted based on the method of Surface Mount. 100 pins are on it in total. This component is a part of Microcontrollers. The devices have a maximum memory size of 256kB that can be used to store programs and data. It performs extremely well at a frequency of 32MHz. It appears that there are 5 timers/counters in use. This part is an integral part of the PIC CPU family. During normal operation, the supply voltage (Vsup) should be kept above 2V. Internal is the oscillator type it uses.
PIC24FJ256GA110-I/PF Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ256GA110-I/PF Applications
There are a lot of Microchip Technology PIC24FJ256GA110-I/PF Microcontroller applications.
- Fax machines
- Wastewater treatment
- Sonography (Ultrasound imaging)
- Routers
- Oscilloscopes
- Food and beverage
- Ipod
- X-ray
- Firewalls
- Heart rate monitors
