PIC24FJ256GB110-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FJ256GB110 |
| Pin Count | 100 |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 83 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | I2C, SPI, UART/USART, USB OTG |
| Bit Size | 16 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 2 Mb |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 84 |
| Number of UART Channels | 4 |
| Number of ADC Channels | 16 |
| Min Supply Voltage (DC) | 2V |
| Number of PWM Channels | 9 |
| Number of I2C Channels | 3 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24FJ256GB110-I/PT Overview
For the purpose of saving space, it is available in the 100-TQFP package. A Surface Mount mounting method is used. Tray is the package that contains it. There is a PIC as core processor in this device. When working, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. A total of 83 I/Os are available on this device. To find comparable components, use the PIC24FJ256GB110 base part number. At QUAD, its terminals are located. It consists of 100 terminationals. Part of the PIC? 24F series, this electrical component is used in a variety of applications. Because the supply voltage is 3.3V, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. A number of 100 pins are used to construct it. Based on the Surface Mount method, it is mounted. A total of 100 pins are attached to it. Microcontrollers contains this component. The devices have a maximum memory size of 256kB that can be used to store programs and data. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. 5 timers/counters are in use. This part is part of the PIC family of CPUs. The number 84 represents the number of programmable I/O ports on the board. An oscillator of type Internal is used.
PIC24FJ256GB110-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ256GB110-I/PT Applications
There are a lot of Microchip Technology PIC24FJ256GB110-I/PT Microcontroller applications.
- Toasters
- Accu-check
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Current meter
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Refrigerators
- Traditional industrial transformation
- Routers
- Industrial instrumentation devices
- Kindle
