PIC24FJ32MC101-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | PIC24FJ32MC101 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 15 |
| RAM Size | 1K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 11K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 21mA |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 8 |
| CPU Family | PIC |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 1024 |
| On Chip Data RAM Width | 16 |
| Length | 26.162mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
PIC24FJ32MC101-I/P Overview
For space savings, it is available in the 20-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. It is available in the Tube package. Device with PIC core processor issupported. Work should be done at -40°C~85°C TA. The type of memory it uses is FLASH. A total of 15 I/Os are present. Other components that are comparable to it have the base part number PIC24FJ32MC101. DUAL is the position of its terminals on the board. A 20 termination is contained within it. Part of the PIC? 24F series, this electrical component is used in a variety of applications. As a result of the 3.3V supply voltage, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. The structure is composed of 20 pins. In Microcontrollers, this component is included. Using the devices' 16kB memory size, you can store programs and data. Supply current cannot exceed 21mA. At a frequency of 32MHz, it exhibits excellent efficiency. While employing 3.3V, designers can maximize its supply voltage adaptability. A total of 3 timers/counters have been set up. It is part of the PIC CPU family. An oscillator of type Internal is used.
PIC24FJ32MC101-I/P Features
20-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC24FJ32MC101-I/P Applications
There are a lot of Microchip Technology PIC24FJ32MC101-I/P Microcontroller applications.
- Glucose monitoring systems (for Type 1 Diabetes)
- Projector
- Calculator
- Blood pressure monitors
- PDAs, game consoles
- Nintendo
- Hard drives
- Food and beverage
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Dishwashers
