PIC24FJ32MC101-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FJ32MC101 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Oscillator Type | Internal |
| Number of I/O | 15 |
| Speed | 16 MIPs |
| RAM Size | 1K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, POR, PWM, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 11K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 21mA |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| ROM (words) | 32768 |
| On Chip Program ROM Width | 8 |
| CPU Family | PIC |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 1024 |
| Number of Timers | 5 |
| On Chip Data RAM Width | 16 |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| RoHS Status | ROHS3 Compliant |
PIC24FJ32MC101-I/SO Overview
Due to its space-saving qualities, it is available in the 20-SOIC (0.295, 7.50mm Width) package. In this case, it is mounted using the method of Surface Mount. There is a Tube package available for it. A core processor of PIC is present in the device. The temperature should be kept at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. 15 I/Os have been provided by the device. To find comparable components, use the PIC24FJ32MC101 base part number. The terminals of this device are located at DUAL. It consists of 20 terminationals. An electrical component such as this is included in the series PIC? 24F. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A number of 20 pins are used to construct it. It falls under the category of Microcontrollers. It is important to note that the maximum supply current is 21mA. Power comes from a source of 3.3V. During the operation of the device, the clock runs at a frequency of 32MHz. This part is an integral part of the PIC CPU family. Normal operation requires a supply voltage (Vsup) that is higher than 3V. The oscillator type Internal is used to operate the device.
PIC24FJ32MC101-I/SO Features
20-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ32MC101-I/SO Applications
There are a lot of Microchip Technology PIC24FJ32MC101-I/SO Microcontroller applications.
- Accu-check
- Smart highways (navigation, traffic control, information monitoring and car service)
- Telephone sets
- DCS control intelligent sensor
- Washing machine
- Fabric
- Process control devices
- Industrial robot
- PDAs, game consoles
- Computers and laptops-video calling, email, blogging
