PIC24FJ32MC102-I/ML
| Parameters | |
|---|---|
| On Chip Program ROM Width | 8 |
| CPU Family | PIC |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 1024 |
| Number of Timers | 5 |
| On Chip Data RAM Width | 16 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FJ32MC102 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| Speed | 16 MIPs |
| RAM Size | 1K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, POR, PWM, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 11K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 8x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| ROM (words) | 32768 |
PIC24FJ32MC102-I/ML Overview
As a result, it is available in the 28-VQFN Exposed Pad package. Mounted using Surface Mount. It comes in a Tube package. The device runs in PIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. There are 21 I/Os on it, which makes it a very simple device. Based on the PIC24FJ32MC102 base part number, it can be compared with other components. The position of the device is QUAD at terminal. 28 terminations are present in it. Part of the PIC? 24F series, this electrical component is used in a variety of applications. The 3.3V supply voltage enables high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. It is constructed with 28 pins. It is one of the components included in Microcontrollers. A 3.3V power source powers it. During the operation of the device, the clock runs at a frequency of 32MHz. PIC CPUs are included in this part. Normal operation requires a supply voltage (Vsup) that is higher than 3V. An oscillator type Internal is required for it to work.
PIC24FJ32MC102-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ32MC102-I/ML Applications
There are a lot of Microchip Technology PIC24FJ32MC102-I/ML Microcontroller applications.
- Laminators
- Embedded gateways
- Mobile computers
- Toasters
- Computed Tomography (CT scan)
- Calculator
- Food and beverage
- Microwave ovens
- Smoke alarms
- Glucose monitoring systems (for Type 1 Diabetes)
