PIC24FJ64GA002-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | IT ALSO OPERATES IN 16 MHZ AT 2V MINIMUM SUPPLY |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FJ64GA002 |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| Speed | 24 MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 22K x 24 |
| Connectivity | I2C, PMP, SPI, UART/USART |
| Supply Current-Max | 20mA |
| Bit Size | 16 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| DAC Channels | NO |
| CPU Family | PIC |
| Number of PWM Channels | 5 |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24FJ64GA002-E/SS Overview
There is a 28-SSOP (0.209, 5.30mm Width) package available to save space. Surface Mount is used for mounting. Tube is the package that contains it. There is a PIC as core processor in this device. It is important to keep the temperature at -40°C~125°C TA while working. There is FLASH program memory in it. There are 21 I/Os on the board. To find comparable components, use the PIC24FJ64GA002 base part number. The terminals of this device are located at DUAL. There are a total of 28 terminations in it. The PIC? 24F series contains this electrical component. High efficiency is possible due to the 2.5V supply voltage. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. 28 pins are used to construct it. A method of mounting is used, which is Surface Mount. This component is a part of Microcontrollers. In the device, there is a memory capacity of 64kB which may be used to store programs and data. It is important to note that the maximum supply current is 20mA. The system is highly efficient when working at a frequency of 32MHz. As part of the PIC CPU family, this component is included. The property of IT ALSO OPERATES IN 16 MHZ AT 2V MINIMUM SUPPLY is also possessed by it. The oscillator type Internal is used to operate the device.
PIC24FJ64GA002-E/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ64GA002-E/SS Applications
There are a lot of Microchip Technology PIC24FJ64GA002-E/SS Microcontroller applications.
- Smart instruments
- Hard drives
- Food and beverage
- Xbox
- Light sensing & controlling devices
- Oscilloscopes
- Information appliances (networking of household appliances)
- Robotic prosthetic limbs
- Automatic staplers
- Volt meter
