PIC24FV16KA301T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FV16KA301 |
| Pin Count | 20 |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 5.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 12x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | TS-16949 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 16 |
| Time-Min | SECONDS |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24FV16KA301T-I/SS Overview
As a result, it is available in the 20-SSOP (0.209, 5.30mm Width) package. This is mounted using the Surface Mount method. Package Tape & Reel (TR) contains it. A PIC core processor powers the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. 17 I/Os can be found on it. It has a base part number of PIC24FV16KA301 that can be used to find other components that are comparable. At DUAL, its terminals are located. This circuit consists of 20 terminationals. It is a member of the PIC? XLP? 24F series of electrical components. The supply voltage of 3.3V allows for high efficiency. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. It is constructed with 20 pins. A method of mounting is used, which is Surface Mount. A total of 20 pins are attached to it. In the subcategory of Microcontrollers, this component is included. It is possible to store programs and data on the devices, as they have a memory size of 16kB. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. 5 counters/timers are currently active. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2V. An oscillator of type Internal is used.
PIC24FV16KA301T-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FV16KA301T-I/SS Applications
There are a lot of Microchip Technology PIC24FV16KA301T-I/SS Microcontroller applications.
- Refrigerators
- Electromechanical control
- Computer/laptop
- Walkie talkies
- Washing machines
- Electronic jamming systems
- Volt meter
- Digital set-top boxes
- Keyboards
- Fax machines
