PIC24FV16KA302-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PIC® XLP™ 24F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Base Part Number | PIC24FV16KA302 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| Nominal Supply Current | 3.5mA |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 16KB 5.5K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| EEPROM Size | 512 x 8 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| Number of ADC Channels | 13 |
| Number of External Interrupts | 3 |
| Number of PWM Channels | 3 |
| Number of I2C Channels | 2 |
| Time-Min | SECONDS |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24FV16KA302-I/SP Overview
Due to the benefits of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. A Through Hole mounting method is used. There is a Tube package available for it. The device runs in PIC core processor. Working at -40°C~85°C TA temperature is recommended. FLASH has been assigned to it as a program memory. It has a number of 23I/Os. Based on its base part number of PIC24FV16KA302, other similarly-sized components can be found. At DUAL, its terminals are located. It consists of 28 terminationals. This electrical component is part of the PIC? XLP? 24F series. High efficiency is possible due to the 3.3V supply voltage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. A total of 28 pins are used in its construction. The mounting of this device is carried out following the method of Through Hole. Total number of pins is 28. Microcontrollers contains this component. Data and programs may be stored on the devices which have a memory size of 16kB. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. It appears that there are 5 timers/counters in use. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2V. The oscillator type Internal is used to operate the device.
PIC24FV16KA302-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC24FV16KA302-I/SP Applications
There are a lot of Microchip Technology PIC24FV16KA302-I/SP Microcontroller applications.
- Sonography (Ultrasound imaging)
- Entertainment products
- Data acquisition and control
- Guidance-GPS
- Blenders
- Fax machines
- Instrument control
- Smoke alarms
- Switches
- Entertainment-radios, CD players, televisions
