PIC24HJ128GP204-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100, PIC® 24H |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24HJ128GP204 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.6V |
| Power Supplies | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Speed | 40 MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | I2C, IrDA, LINbus, PMP, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 13x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 131072 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24HJ128GP204-E/ML Overview
For space savings, it is available in the 44-VQFN Exposed Pad package. Mounted using Surface Mount. It is available in the Tube package. With a processor of PIC cores, the device is powered. Work should be performed at a temperature of -40°C~125°C TA. There is FLASH program memory in it. There are 35 I/Os on the board. Based on its base part number of PIC24HJ128GP204, other similarly-sized components can be found. QUAD is the position of its terminals on the board. As far as terminations are concerned, there are 44 terminations present. There are a number of electrical components in the Automotive, AEC-Q100, PIC? 24H series, including this one. Using the 3.3V supply voltage allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. 44 pins are used to construct it. According to Surface Mount, it is mounted. 44 pins are on it in total. It falls under the category of Microcontrollers. A device with a memory size of 128kB can store programs and data. Supply current is maximum at 76mA. A 3.3V source is used for powering it. It is highly efficient when it works at a frequency of 20MHz. Using 3.6V's adaptability as a supply voltage allows designers to maximize its use. 5 timers/counters are in use. It is part of the PIC CPU family. Using an oscillator type Internal, it operates.
PIC24HJ128GP204-E/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24HJ128GP204-E/ML Applications
There are a lot of Microchip Technology PIC24HJ128GP204-E/ML Microcontroller applications.
- Toasters
- Dishwashers
- Refrigerators
- DCS control intelligent sensor
- Printers
- Coffee machines
- Blenders
- Switches
- Oscilloscopes
- Projectors
