PIC24HJ128GP504-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PIC® 24H |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24HJ128GP504 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Speed | 40 MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, PMP, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| CPU Family | PIC |
| Number of ADC Channels | 13 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24HJ128GP504-I/ML Overview
To save space, it is included in the 44-VQFN Exposed Pad package. A Surface Mount mounting method is used. You can find it in the package of Tube. The device runs in PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. It has a type of program memory of FLASH. The device has 35 I/Os. A comparable component can be found by using the base part number PIC24HJ128GP504. The terminals of this device are located at QUAD. A 44 termination is contained within it. Part of the PIC? 24H series, this electrical component is used in a variety of applications. Using the 3.3V supply voltage allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. A total of 44 pins are required to construct this device. The mounting of this device is carried out following the method of Surface Mount. This device has a total of 44 pins. Microcontrollers contains this component. Memory size for the devices is 128kB, which can be used to store programs and data. There is a source of power of 3.3V that powers this device. Using a frequency of 80MHz, it is very efficient. In total, there are 5 timers and counters. As part of the PIC CPU family, this component is included. In order to maintain normal operation, Vsup must be above 3V. There is an oscillator type Internal used in this circuit.
PIC24HJ128GP504-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24HJ128GP504-I/ML Applications
There are a lot of Microchip Technology PIC24HJ128GP504-I/ML Microcontroller applications.
- Fire detection & safety devices
- Equipment control
- Magnetic resonance imaging (MRI)
- Fax machines
- Xbox
- X-ray
- Process control devices
- Multi-meter
- Security systems
- Washing machines
