PIC24HJ128GP504-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | PIC® 24H |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24HJ128GP504 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Nominal Supply Current | 38mA |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, PMP, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 13x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| Density | 1 Mb |
| CPU Family | PIC |
| Number of ADC Channels | 13 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24HJ128GP504-I/PT Overview
To save space, it is included in the 44-TQFP package. Using Surface Mount, it is mounted. There is a Tray package available for it. It is equipped with a PIC core processor. Working at -40°C~85°C TA temperature is recommended. FLASH has been assigned to it as a program memory. The device has 35 I/Os. It has a part number of PIC24HJ128GP504 that can be used to locate similar components. QUAD is the position of its terminals on the board. Currently, it consists of 44 terminationals. Part of the PIC? 24H series, this electrical component is used in a variety of applications. The 3.3V supply voltage enables high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A number of 44 pins are used to construct it. According to Surface Mount, it is mounted. It is equipped with 44 pins in total. In the subcategory of Microcontrollers, this component is included. The devices have a memory size of 128kB that can be used to store programs and data. Powered by a 3.3V source. The system is highly efficient when working at a frequency of 80MHz. There are currently 5 timers/counters set up on the system. It belongs to the PIC CPU family. During normal operation, the supply voltage (Vsup) should be kept above 3V. There is an oscillator type Internal used in this circuit.
PIC24HJ128GP504-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24HJ128GP504-I/PT Applications
There are a lot of Microchip Technology PIC24HJ128GP504-I/PT Microcontroller applications.
- Heart rate monitors
- Nintendo
- Oscilloscopes
- Binding machines
- X-ray
- Hard drives
- Instrument control
- Information appliances (networking of household appliances)
- Electronic jamming systems
- Printers
