PIC24HJ128GP506T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PIC® 24H |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24HJ128GP506 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| Speed | 32 MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 90mA |
| Bit Size | 16 |
| Data Converter | A/D 18x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 13 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24HJ128GP506T-I/PT Overview
As a result, it is available in the 64-TQFP package. In this case, it is mounted using the method of Surface Mount. There is a Tape & Reel (TR) package available for it. There is a PIC as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. 53 I/Os can be found on it. To find comparable components, use the PIC24HJ128GP506 base part number. A QUAD position is assigned to its terminals. It consists of 64 terminationals. There are a number of electrical components in the PIC? 24H series, including this one. Because of the 3.3V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. There are 64 pins used in the construction of this device. It is mounted based on the method of Surface Mount. 64 pins are on it in total. In Microcontrollers, this component is included. It is possible to store programs and data on the devices, as they have a memory size of 128kB. It should be noted that 90mA represents the maximum supply current. Using a frequency of 40MHz, it is very efficient. While employing 3.3V, designers can maximize its supply voltage adaptability. There are 13 timers/counters. This part is part of the PIC family of CPUs. There is an oscillator type Internal used in this circuit.
PIC24HJ128GP506T-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24HJ128GP506T-I/PT Applications
There are a lot of Microchip Technology PIC24HJ128GP506T-I/PT Microcontroller applications.
- Petrochemical
- Broadband technology, video and voice processing
- Toasters
- Smart highways (navigation, traffic control, information monitoring and car service)
- Smoke alarms
- Calculators
- Nintendo
- Television
- Home appliances
- Mice
